IBM 48P7062
- Part Number: 48P7062
- Category: Modules
- Manufacturer: IBM Corporation
- Quantity: 4
This BladeCenter 2-port Fibre Channel Switch Module option is similar to the Ethernet switch, but contains two Fibre Channel connections capable of supporting up to 2Gbps transmissions. This switch option is required when an HS20 Fibre Channel Expansion Card is installed in one or more BladeCenter HS20s. Each HS20 Fibre Channel Expansion Card contains two Fibre Channel connections supported through installation of either one or two Fibre Channel switch modules.
Installation of two BladeCenter 2-port Fibre Channel Switch Module options provides failover redundancy. The Fibre Channel switches are installed in network switch module bays 3 and 4 due to the routing of signals from the Fibre Channel card interface to the switch module bays.
The Fibre Channel switch contains two small form factor pluggable (SFP) ports that support optionally available long- or short-wave SFP modules and appropriate Fibre Channel cabling. A BladeCenter SAN Utility is provided for switch management.
Installation of two BladeCenter 2-port Fibre Channel Switch Module options provides failover redundancy. The Fibre Channel switches are installed in network switch module bays 3 and 4 due to the routing of signals from the Fibre Channel card interface to the switch module bays.
The Fibre Channel switch contains two small form factor pluggable (SFP) ports that support optionally available long- or short-wave SFP modules and appropriate Fibre Channel cabling. A BladeCenter SAN Utility is provided for switch management.
Technical Information
Application/Usage: Optical NetworkMedia & Performance
Media Type Supported: Optical FiberMaximum Data Transfer Rate: 2.12 Gbit/s
I/O Expansions
Number of Total Expansion Slots: 2Expansion Slot Type: SFP (mini-GBIC)