MILAN MIL-140T
- Part Number: MIL-140T
- Category: Transceivers/Media Converters
- Manufacturer: Transition Networks, Inc
- Quantity: 2
The 140T Fiber-Twist is a unshielded twisted pair (UTP) to multi-mode fiber optic media converter designed to interconnect standard LAN-based Ethernet ports at distances of up to 2 km. The 140T converts Ethernet media without adding the delay associated with repeaters and will not add to your repeater budget.
The unit features MiLAN's LinkSentry Remote Sensing Technology, which enables the 140T to pass through line failures when signals are lost, as well as looping back failures, in the event one strand is damaged in a cable.
The 140T converter is equipped with an ST connector for fiber optic cabling. The RJ-45 shielded connector is capable of supporting unshielded twisted pair cabling.
The 140T is ideally suited for interconnecting highspeed, half- or full-duplex ports of switching hubs and routers such as those manufactured by Cisco, Nortel Networks, Hewlett-Packard, Cabletron, 3Com and IBM.
The unit features MiLAN's LinkSentry Remote Sensing Technology, which enables the 140T to pass through line failures when signals are lost, as well as looping back failures, in the event one strand is damaged in a cable.
The 140T converter is equipped with an ST connector for fiber optic cabling. The RJ-45 shielded connector is capable of supporting unshielded twisted pair cabling.
The 140T is ideally suited for interconnecting highspeed, half- or full-duplex ports of switching hubs and routers such as those manufactured by Cisco, Nortel Networks, Hewlett-Packard, Cabletron, 3Com and IBM.
Interfaces/Ports
Total Number of Ports: 2Network (RJ-45): Yes
Number of Network (RJ-45) Ports: 1
Number of ST Ports: 1
Media & Performance
Media Type Supported: Twisted PairMedia Type Supported: Optical Fiber
Fiber Mode Supported: Multi-mode
Maximum Distance Supported: 1.24 Mile
Network & Communication
Ethernet Technology: EthernetNetwork Technology: 10Base-T
Network Technology: 10Base-FL