APC MX5000PE
- Part Number: MX5000PE
- Category: General Purpose UPS
- Manufacturer: American Power Conversion Corp
- Quantity: 1
The UPS is a high-power enhanced line interactive uninterruptible power source designed to provide clean, reliable AC power to computer, data handling, and telecommunications loads. Normally, the UPS operates "on-line" and provides power to the load derived from the input utility source. When operating on-line, the UPS continuously regulates the load voltage by compensating for voltage fluctuations occurring over a wide range on the utility. A multilevel transformer tap changing circuit provides this regulation while attaining extremely high levels of on-line efficiency. In response to the need to adjust the load voltage, the UPS temporarily operates the load from power derived from the battery while an appropriate transformer tap change is made. In the event of unacceptable line conditions, transfer of load power from the utility to the inverter occurs synchronously and is virtually seamless under all conditions. The voltage waveshape delivered during "on-battery" operation is a low distortion sine wave. Resynchronization and retransfer of load power to the utility is automatic upon recovery of the line voltage to within normal limits.
A complete UPS system consists of three module types. The UPS is comprised of an Electronics Unit (EU), mounted atop an Isolation Unit (IU). Numerous Battery Packs can be purchased and plugged together on-site to provide the desired run time. The EU is self-connecting to the IU when mounted and is secured in place with the turn of an oversized hand screw. The EU contains the UPS's microprocessor controls, inverter, battery charger, transfer and tap changing circuits, remote interfaces, and the user control and display panel. The IU contains the UPS's isolation transformer, EMI/RFI filtering and surge suppression circuits, bypass circuit, and the utility and load wiring interfaces. The Battery Packs are "daisy chained" pack-to-pack, and to the EU, using a heavy duty cable and lockable connector system. Intelligent communications between Battery Packs and the EU is provided via a flat cable terminated with modular plugs. Each Battery Pack contains four high capacity batteries and microprocessor controlled electronics for communications and for battery pack voltage and current monitoring.
A complete UPS system consists of three module types. The UPS is comprised of an Electronics Unit (EU), mounted atop an Isolation Unit (IU). Numerous Battery Packs can be purchased and plugged together on-site to provide the desired run time. The EU is self-connecting to the IU when mounted and is secured in place with the turn of an oversized hand screw. The EU contains the UPS's microprocessor controls, inverter, battery charger, transfer and tap changing circuits, remote interfaces, and the user control and display panel. The IU contains the UPS's isolation transformer, EMI/RFI filtering and surge suppression circuits, bypass circuit, and the utility and load wiring interfaces. The Battery Packs are "daisy chained" pack-to-pack, and to the EU, using a heavy duty cable and lockable connector system. Intelligent communications between Battery Packs and the EU is provided via a flat cable terminated with modular plugs. Each Battery Pack contains four high capacity batteries and microprocessor controlled electronics for communications and for battery pack voltage and current monitoring.
Technical Information
Receptacles: 6 x NEMA L6-30RReceptacles: 1 x NEMA 5-15R
Receptacles: 2 x NEMA L14-30R
Power Description
Load Capacity (VA): 5000 VAInput Voltage: 220 V AC
Output Voltage: 240 V AC
Battery Information
Backup/Run Time (Full Load): 10.20 MinuteMaximum Battery Recharge Time: 3 Hour
Physical Characteristics
Height: 26.9"Width: 13.8"
Depth: 17.8"
Weight (Approximate): 303 lb