CISCO PWR600-AC-RPS-NCAB
- Part Number: PWR600-AC-RPS-NCAB
- Category: Power Supplies
- Manufacturer: Cisco Systems, Inc
- Quantity: 1
This power system is ideal for powering a stack or rack mounted set of any mix of these products in the NetBeyond extended network system of modular, stackable LAN and WAN products. It is flexible and cost-effective in addressing the uptime requirements of these offices by offering two levels of redundancy: quasi-redundant mode and fully redundant mode.
In quasi-redundant mode, the RPS can support four load units. In this configuration, the mean time between failure (MTBF) of the RPS substantially exceeds that of the power supply in the individual external devices (hubs, switches, routers and access servers). In fully redundant mode, the RPS can support two external devices with a special cable offering extremely high uptime. Individual external devices can be hot inserted without affecting other external devices in either configuration.
The RPS supports both local and remote monitoring of status. Front panel LEDs allow a quick local check of status for AC input power, DC output power, cooling fans, and system temperature. When one of the external devices that the RPS powers is a Cisco 3600 Series, the Cisco 3600 can receive and store status signals from the RPS. In turn, the RPS status stored on the Cisco 3600 series is available for remote monitoring via Simple Network Management Protocol (SNMP) products such as CiscoWorks.
In quasi-redundant mode, the RPS can support four load units. In this configuration, the mean time between failure (MTBF) of the RPS substantially exceeds that of the power supply in the individual external devices (hubs, switches, routers and access servers). In fully redundant mode, the RPS can support two external devices with a special cable offering extremely high uptime. Individual external devices can be hot inserted without affecting other external devices in either configuration.
The RPS supports both local and remote monitoring of status. Front panel LEDs allow a quick local check of status for AC input power, DC output power, cooling fans, and system temperature. When one of the external devices that the RPS powers is a Cisco 3600 Series, the Cisco 3600 can receive and store status signals from the RPS. In turn, the RPS status stored on the Cisco 3600 series is available for remote monitoring via Simple Network Management Protocol (SNMP) products such as CiscoWorks.
Power Description
Input Voltage: 240 V ACOutput Voltage: 5 V DC
Output Voltage: 12 V DC
Output Voltage: -12 V DC
Output Power: 600 W
Physical Characteristics
Height: 3.4"Width: 17.5"
Depth: 16"
Weight (Approximate): 27.25 lb